(Notebook cannot be used! When using the conversion power supply make sure that the 5V supply is greater than 1.52A; Make sure that your 3.3V power supply is greater than when using the native power supply 1.52A)

With SSD anti-inserted in the wrong, anti-plug against Design a card, not anti-insert plug into, as long as the insert will be able to work, do not align the position, very humane. Will not be because of improper operation of the burn SSD or adapter!

Identical to the regular SATA hard drive, SATA power and data outlets; with iron fixed feet, more reliable to use. Strictly follow the SATA data cabling specifications, strict and long spacing and complete stratigraphic shield.

A native 3.3V power supply, or from 5V to 3.3V power supply, jumper for the user to select.

On-board 3.3V 5A voltage conversion circuit, AMS1084-33 three-terminal regulator + tantalum capacitor filter enough with 256G of AIRSSD, and power SATA interface compatible with any host. the original authentic goods of the big manufacturers are not generally made in China or Taiwan goods ! Materials is absolutely good!

Onboard a large area of copper foil heat sink, the AIR the SSD is more stable.

With SSD tighten the screws and SSD screws, nuts, and install insulation pillar.

Only for APPLE MacBook Air MC505 MC503 MC506 MC968 MC969 MC965 = Late 2010 MacBook Air 3,1 (A1370)/3,2 (A1369)& Mid 2011 MacBook Air

Installation of positioning holes in line with the spacing of the chassis, and can be easily installed on a CD-ROM drive location or hard drive location.

Support SATA Raid function.

Adapter underside all ground, without any other signal lines and power lines, the adapter level on the hard disk or optical drive. (But not phase) and other power.