|  About Us  |  Contact Us  |  How to Buy  |  Refund Policy

Network Cable Tester
Network Cable Tester
Product Code: UPCSF007900
Network Cable Tester is a powerful special tool to prevent and solve cable installation problem. Network Cable tester is the best choice to verify any speech and data cable installation procedure. The tester is capable to have a number of tests such as cable connection sequence, length, user jumper and cable connection continuity and determine any open circuit, short circuit, jumper or cross-talk interference. It is a useful tool to reduce cable installation cost and save cable installation time.
This item is Discontinued
Network Cable Tester Network Cable Tester Network Cable Tester Network Cable Tester Network Cable Tester Network Cable Tester Network Cable Tester Network Cable Tester
Features:
  • One person enough to complete cable continuity check
  • Check wiring error in 5E, 6E, coaxial cable and telephone line, such as open circuit, short circuit, jumper wire, reverse connection or cross-talk interference
  • Locate the wiring or connection error
  • Measure cable length and determine the distance of open circuit and short circuit
  • Dynamically calibrate cable length and make length measurement as accurate as 97%
  • Simple and easy use. Big screen to display test result clear
  • Automatically time-delay shut off
  • Measure length and pair with or without far-end recognizer
  • Locate cable and there are 8 far-end passive test jacks (ID no. ID1-ID8)
  • Far-end recognizer with prompting voice
  • Self-checking function and automatically compensate my change in battery capacity or ambient temperature
  • Single board computer software watchlog design and reliable operation
  • Powered by 4 x AA batteries
  • Dimension: 80 x 180 x 40mm (approx.)
  • Weight: 280g

Specification:
  • Display: Special 4 x 16 character big screen LCD lattice
  • Type of Test Cable: STP/UTP twin twisted cable, coaxial cable, telephone line
  • Tester Port: Tester RJ45 master port (M),
    Tester Port: Tester LOOPBACK RJ45 port (L),
    Tester Port: Far-end recognizer RJ45 port (R)
    Tester Port: The extra BNC and RJ11 converters are used to measure and check the continuity of coaxial cable and telephone line
  • Length Measurement of Twin Twisted Cable:
    Scope: 1 350M (3 1,200 ft)
    Calibration accuracy: 3% (±0.5M or ±1.5ft) (calibrating cable > 5M)
    Shipment accuracy: 5% (±0.5M or ±1.5ft) (AMP, AT&T Class 5 cable)
    Display: M or ft
  • Length Calibration: User can set calibration factor by himself with a given length cable. The length of calibrating cable is more than 5 M
  • Wire Sequence and Locating Cable Error: Check errors such as open circuit, reverse connection, cross-over or cross-talk interference
  • Locating Cable: 8 far-end passive test jacks (ID 1 ≥ ID 8)
  • Automatic Time-delay Shut Off Time: The tester does not operate for 30 minutes

Package Contents:
  • Network Cable Tester
  • User's Manual


Related Products

  • ...

  • ...

  • ...

  • ...

  • ...

  • ...

  • ...

  • ...

Sign Up Our Newsletter