Home >
USB Products >
PC Stuff > IDE To SATA Bi-Directional Converter
Features:
- IDE to SATA 1.0
- SATA 1.0 to IDE
- Conversion Type switch
- LED Power indicator
- Easy install & No driver needed
- Automatic SATA 1.5 Gbps speed negotiation
- ATA / ATAPI PIO mode 0 to 4
- ATA / ATAPI Ultra DMA transfer rates: 16.7, 25, 33, 48, 66, 100, 133, 150 MB/s
- ATA / ATAPI LBA48 addressing mode associated with 2-byte sector count
- Supports SATA hot-plug
- Ultra low power consumption
- Works for AC & DC couple between transmitter and receiver
- Provides specified OOB signal detection and transmission 0
- Supports Spread Spectrum Clocking to reduce EMI (Electro-Magnetic Interference)
- Supports Partial/Slumber power management
- Provides adjustable TX signal amplitude and pre-emphasis level
- Supports Slave drives
- Adapters included to power unit from 4-pin Molex M/F, SATA, 4-pin floppy connectors
Package Contents:
- Parallel and Serial ATA Bi-Directional Converter
- SATA cable
- SATA power and 4-pin female Molex power connector adapter
- 4-pin Molex male/female and 4-pin floppy power connector adapter
- Driver CD
Product Requirements:
- Available Parallel or Serial ATA ports (Motherboard or Hard drive)
- Available power connection
|
|
|